Panasonic KX-NCP500, Начало работы

Страница: 52 / 64

4.3.2 Registering IP Telephones
After the programming of the IPCMPR card and IP telephone is finished, the IP telephone must be registered
to the PBX. This is done using the Maintenance Console.
Registration of IP-PTs
1. a.
Under Configuration , click Slot .
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen.
c.
Click Select Shelf .
d.
Move the mouse pointer over the V-IPEXT32 card
(Virtual 32-Channel VoIP Extension Card). A menu
will be shown under the mouse pointer.
e.
Click Port Property .
2. Click Registration .
A dialogue box will appear. Non-registered (available)
extension numbers and names are displayed on the left.
3.
a.
Highlight numbers and names and click the right
arrow to select them for registration.
b.
Click Next . A screen will appear with information on
the current IP-PT extension number and name, and
index number for programming.
Note
•
If the IP-PT has been connected to the LAN
and power has been turned on, the IP
address of the IPCMPR card will be
assigned automatically.
•
If not, connect the IP-PT to the LAN and turn
the power on within 15 minutes after this
operation is done. The IP address of the
IPCMPR card will then be assigned
automatically.
c.
If the registration is still in progress, the dialogue box
will show "Registration Executing".
If the registration is successful, the dialogue box will
show "Registration Completed". Click
Close .
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
52 Getting Started
4.3.2 Registering IP Telephones