Panasonic KX-NCP500, Начало работы

Страница: 33 / 64

7. a.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
b.
Click INS .
*1 When "En-bloc" is selected, you need to press "#" after dialling the phone number.
Programming for the Extension Number Method
1. a.
Under Configuration , click Slot .
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen.
c.
Click Select Shelf .
d.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
e.
Click Port Property .
Confirm that all ports are in service ( INS ).
Note
When a V-IPGW16 card is installed, 8 ports (1–8)
are available. When two V-IPGW16 cards are
installed, 16 ports (1–16) are available.
2. a.
From the system menu, click CO & Incoming Call .
b.
Click CO Line Settings .
c.
Type the CO Name and assign an unused Trunk
Group Number to be used for all IP trunks.
d.
Click OK .
3. a.
From the system menu, click System .
b.
Click Numbering Plan .
c.
Click Main .
d.
Click the Other PBX Extension tab.
e.
In the Other PBX Extension Numbering (TIE) box,
type a starting digit of destination extension.
f.
Click OK .
Getting Started 33
4.2.3 Programming the Network Settings