Panasonic KX-NCP500, Начало работы

Страница: 28 / 64

4.2 Programming the Virtual 16-Channel VoIP
Gateway Card
There are 2 methods to programme the V-IPGW16 card (Virtual 16-Channel VoIP Gateway Card) to establish
VoIP communications between PBXs at different locations, as follows:
PBX code method The caller dials the unique PBX code of the PBX to which the called party is
connected, in addition to the destination number.
Extension number
method The caller dials only the destination number of the called party to call through
PBXs at different locations (hence there are fewer digits to dial than with the
PBX code method).
Note
For a detailed explanation about each method, refer to "1.30 Networking Features" in the Feature Guide.
4.2.1 Assigning the Hunt Pattern
The hunt pattern determines how to route incoming calls through virtual IP trunks to the PBX. The procedure
below demonstrates the process of programming the hunt pattern of the local PBX. After the hunt pattern at
the local PBX has been fully assigned, repeat the procedure for the hunt pattern at the remote PBX with the
appropriate setting values.
1. a.
Under Configuration , click Slot .
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen.
c.
Click Select Shelf .
d.
Move the mouse pointer over the installed
V-IPGW16 card. A menu will be shown under the
mouse pointer.
e.
Click Shelf Property .
f.
Click Hunt Pattern .
2. a.
When using the PBX code method:
In the Leading Number box, type the local PBX
code and extension starting digit.
When using the extension number method:
In the Leading Number box, type the local
extension starting digit.
b.
Click OK to return to the Shelf Property screen.
Note
For more details about hunt pattern assignment, refer to "3.13 [1-1] Slot—Shelf Property - Virtual IP
Gateway—Hunt Pattern" in the PC Programming Manual.
28 Getting Started
4.2.1 Assigning the Hunt Pattern