Information about
night vision mode
The camera features an array of
infrared LEDs that light
automatically in low-light
conditions, allowing camera
images to be viewable even when
the surrounding area is dark.
Note:
R
When night vision mode is
active, the colours in camera
images may appear different
from normal.
R
When night vision mode is
active, the array of infrared
LEDs that surround the
camera’s lens light up in a faint
red colour that can be seen in
the dark.
R
If the camera is installed in front
of a window and points directly
at the window, images may be
poor when night vision mode is
active.
Wall mounting
Drive two screws (not supplied)
into the wall, and then mount the
unit as shown.
A
A
B
B
31 mm
Screws
Note:
R
Make sure that the wall and the
fixing method are strong
enough to support the weight of
the unit.
Adjusting the angle
Adjust the angle as desired.
Note:
R
When adjusting the angle,
make sure the unit does not tip
over.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
31
Appendix
HNC800E_(en_en)_0222_ver.101.pdf 31
2017/02/22 13:28:39
