R
If your wireless router detects
radar waves, it may change
channels automatically and use
frequencies that are restricted
for outdoor use (5.180 GHz –
5.240 GHz (channels 36–48)
and 5.260 GHz – 5.320 GHz
(channels 52–64)).
R
When using frequencies in the
5.260 GHz – 5.320 GHz range
(channels 52–64) or the
5.500 GHz – 5.700 GHz range
(channels 100–140), the
following limitations apply
according to regulations.
– Before communication starts
on each channel, the wireless
router scans for radar waves
for 1 minute. During this time,
the wireless router will not
communicate.
– If the wireless router detects
radar waves while
communicating, the wireless
router changes the channel
automatically and
communication may be
interrupted.
Open source
software notice
R
Parts of this product use open
source software supplied based
on the relevant conditions of the
Free Software Foundation’s
GPL and/or LGPL and other
conditions. Please read all
licence information and
copyright notices related to the
open source software used by
this product. This information is
available at the following web
page:
www.panasonic.net/pcc/
support/tel/homenetwork/
At least three (3) years from
delivery of this product,
Panasonic Corporation will give
to any third party who contacts
us at the contact information
provided below, for a charge of
no more than the cost of
physically distributing source
code, a complete
machine-readable copy of the
corresponding source code and
the copyright notices covered
under the GPL and the LGPL.
Please note that software
licensed under the GPL and the
LGPL is not under warranty.
www.panasonic.net/pcc/
support/tel/homenetwork/
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
35
Appendix
HNC800E_(en_en)_0222_ver.101.pdf 35
2017/02/22 13:28:39
