1. Installation and Quick Start
4
1.4 Recording paper
A
Open the top cover by pressing the top cover release
button (
1
).
B
Install the recording paper.
C
Insert the leading edge of the paper into the opening
above the thermal head (
1
).
D
Pull the paper out of the unit.
L
Make sure that there is no slack in the paper roll.
E
Close the top cover securely by pushing down on
both sides.
F
For KX-FT982:
Press
{
FAX/START
}
, then tear off the excess paper
by pulling it towards you.
For KX-FT984:
Press
{
FAX/START
}
to cut the paper.
Correct
Incorrect
1
1
Note:
L
If the paper is secured with glue or tape, cut
approximately 15 cm from the beginning of the roll
before installing it.
L
When the power cord is connected, a message is
printed each time the top cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.
L
For accessory information, see page 3.
{
FAX/START
}
{
FAX/START
}
FT982_984HK-PNQX1347ZA-OI-en.book Page 4 Friday, June 13, 2008 10:35 AM