8. Programmable Features
29
Code #13: Setting the dialling mode
DIAL MODE
=TONE
[
±
]
See page 9 for details.
Code #17: Setting the ringer tone
RINGER TONE
=TONE 1
[
±
]
To set the ringer tone from one of 3 patterns for outside
calls. You can select
“
TONE 1
”
(default),
“
TONE 2
”
or
“
TONE 3
”
.
8.3 Advanced features
See page 28 for how to enter advanced feature
programming.
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[
±
]
“
ON
”
(default): The unit will print a journal report
automatically after every 30 new fax transmissions and
receptions (page 18).
“
OFF
”
: The unit will not print a journal report, but will
keep a record of the last 30 fax transmissions and
receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[
±
]
If you cannot send a fax overseas even if the number is
correct and the line is connected, activate this feature
before sending the fax.
This feature improves the reliability by reducing the
transmission speed.
“
ERROR
”
(default): When the previous fax transmission
fails and you wish to re-send the document.
“
NEXT FAX
”
: This setting is effective only for the next
attempted fax transmission. After transmission, the unit
will return to the previous setting.
“
OFF
”
: Deactivates this feature.
Note:
L
This feature is not available for broadcast
transmission.
L
Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±
]
This feature allows you to take advantage of low-cost
calling hours offered by your telephone company. This
feature can be set up to 24 hours in advance of the
desired time.
To send a document:
1.
Insert the document.
2.
If necessary, press
{A}
or
{B}
repeatedly to select
the desired resolution (page 18).
3.
Press
{
MENU
}
.
4.
Press
{#}
then
{
2
}{
5
}
.
5.
Press
{A}
or
{B}
repeatedly to select
“
ON
”
.
6.
Press
{
SET
}
.
7.
Enter the fax number (page 19).
8.
Press
{
SET
}
.
9.
Enter the transmission start time.
L
If you select 12-hour time entry when you set the
date and time (page 10), press
{*}
repeatedly to
select
“
AM
”
or
“
PM
”
.
L
If you selected 24-hour time entry when you set
the date and time (page 10), the time is set using
24-hour time entry.
10.
Press
{
SET
}
.
11.
Press
{
MENU
}
.
Note:
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=OFF
[
±
]
“
ON
”
: The Caller ID list will be printed automatically each
time the unit logs 30 different callers (page 15).
“
OFF
”
(default): The Caller ID list will not be printed, but
the unit will keep a record of the information for the last
30 different callers.
Code #31: Activating the Distinctive Ring feature
DISTINCTIVE RING
=OFF
[
±
]
See page 26 for details.
Code #36: Receiving oversized documents
RCV REDUCTION
=ON
[
±
]
To slightly reduce the received fax image when printing,
so that the received document will be approximately the
same length as the original document.
“
ON
”
(default): The received fax image will be printed
slightly smaller than the original image.
“
OFF
”
: Deactivates this feature. The received fax image
will be printed at the same size as the original image.
Note:
L
A slight margin will be added to the printed
documents, and therefore if this feature is turned
OFF, the received document will be slightly longer
than the original document.
FT982_984HK-PNQX1347ZA-OI-en.book Page 29 Friday, June 13, 2008 10:35 AM
