Panasonic KX-FP342CX, Руководство по обслуживанию

Страница: 66 / 247

Code Function Set Value Effective
Range
Default Remarks
523 Receive equalizer select
1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
1~4 1 When the telephone station is
from the unit or reception cannot
performed correctly, adjust
accordingly.
524 Transmission equalizer
select
1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
1~4 1 When the telephone station is
from the unit or transmission
be performed correctly, adjust
accordingly.
550 Memory clear
See TEST FUNCTIONS ().
551 ROM check
See TEST FUNCTIONS ().
552 DTMF single tone test 1:ON 2:
OFF 1, 2 2
See TEST FUNCTIONS ().
553 Monitor on FAX
communication select 1:OFF 2:
PHASE B 3
:ALL 1~3 1 Sets whether to monitor the
signal with the unit's speaker
FAX communication or not.
554 Modem test
See TEST FUNCTIONS ().
555 Scan check
See TEST FUNCTIONS ().
556 Motor test 0
See TEST FUNCTIONS ().
558 LCD test
See TEST FUNCTIONS ().
559 Document jam detection
select 1:ON 2:
OFF 1, 2 1
See DOCUMENT JAMS - SENDING
561 KEY test
See TEST FUNCTIONS ().
570 BREAK % select 1:61% 2:
67% 1, 2 1 Sets the % break of pulse dialing
according PBX.
571 ITS auto redial time set X number
of times 00~99 05 Selects the number of times
is redialed (not including the
dial).
572 ITS auto redial line
disconnection time set X second 001~999 065 Sets the interval of ITS redialing.
573 Remote turn-on ring
number set X number
of rings 01~99 10 Sets the number of rings before
unit starts to receive a document
the TEL mode.
590 FAX auto redial time set X number
of times 00~99 05 Selects the number of redial
during FAX communication (
including the first dial).
591 FAX auto redial time
disconnection time set X second 001~999 065 Sets the FAX redial interval during
FAX communication.
592 CNG transmit select
1:OFF
2:ALL
3:AUTO
1~3 2
Lets you select the CNG output
during FAX transmission. ALL
is output at phase A. AUTO:
output only when automatic
performed. OFF: CNG id not
phase A. Refer to
SOMETIME
IS A TRANSMIT PROBLEM ()
66