background image

8. Help

53

L

A recording paper jam occurred. Clear the 
jammed paper (page 57).

—————————————————————

PLEASE WAIT

L

The unit is checking that there is no slack or 
crease on the ink film. Wait for a moment 
while the check is completed.

—————————————————————

POLLING ERROR

L

The other party’s fax machine does not offer 
the polling function. Check with the other 
party.

—————————————————————

RECEIVE ERROR

L

A reception error occurred.

—————————————————————

REDIAL TIME OUT

L

The other party’s fax machine is busy or has 
run out of recording paper. Try again.

—————————————————————

REMOVE DOCUMENT

L

The document is jammed. Remove the 
jammed document (page 59).

—————————————————————

TRANSMIT ERROR

L

A transmission error occurred. Try again.

—————————————————————

UNIT OVERHEATED

L

The unit is too hot. Stop using the unit for a 
while and let the unit cool down.

Frequently Asked Questions

8.3 When a function does 
not work, check here

8.3.1 Initial settings

I cannot hear a dial tone.

L

If you used a splitter to connect the unit, 
remove the splitter and connect the unit to the 
wall jack directly. If the unit operates properly, 
check the splitter.

L

Disconnect the unit from the telephone line 
and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to 
have the unit repaired. If the working 
telephone does not operate properly, contact 
your telephone company.

L

The power cord or telephone line cord is not 
connected. Check the connections.

L

If you connected the fax machine through a 
computer modem, connect the fax machine 
directly to a telephone line jack.

I cannot make calls.

L

The dialling mode setting may be wrong. 
Change the setting of feature #13 (page 44).

The unit does not ring.

L

The ringer volume is turned OFF. Adjust it 
(page 15).

L

The TAD ring setting of feature #06 is set to 

RINGER OFF

”. Change to another ring 

setting (page 44) (KX-FP145 only).

8.3.2 General

The unit displays “

CHECK PAPER

” though the 

paper is inserted.

L

The paper is inserted halfway. Insert it 
correctly (page 13) and press 

{

START

}

 to 

clear the message.

The other party complains they only hear a 
fax tone and cannot talk.

L

FAX ONLY mode is set. Tell the other party 
the number is only used for faxes.

L

Change the receiving mode:

KX-FP141: TEL mode (page 29).

KX-FP145: TAD/FAX mode (page 30) or 
TEL mode (page 29).

FP141-145G.book  Page 53  Friday, October 31, 2003  5:03 PM

Содержание KX-FP141G











































































Отзывы: