6. Programmable Features
38
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2
[
±
]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “
1
”, “
2
” (default), “
3
”, “
4
”, “
5
”, “
6
”,
“
7
”, “
8
” or “
9
”. If you are using the unit with an
answering machine, set to more than 4 (page
33).
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
=OFF
[
±
]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID to enable remote operation
of the answering machine.
1.
Press
{
MENU
}
.
2.
Press
{#}
then
{
1
}{
2
}
.
3.
Press
{A}
or
{B}
repeatedly to select “
ON
”.
4.
Press
{
SET
}
.
5.
Enter your ID from 1 to 5 digits, using 0–9,
{*}
and
{#}
.
L
The default ID is “
11
”.
6.
Press
{
SET
}
.
7.
Press
{
MENU
}
.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A
[
±
]
You can select “
A
” (default), “
B
” or “
C
”.
6.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[
±
]
“
ON
” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 28).
“
OFF
”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[
±
]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
L
This feature is not available for broadcast
transmission.
L
The calling charge may be higher as the
transmission speed is slowed down.
“
NEXT FAX
”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
ERROR
” (default): When the previous fax
transmission fails and you wish to re-send the
document automatically.
“
OFF
”: Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±
]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1.
Insert the document.
2.
Press
{
MENU
}
.
3.
Press
{#}
then
{
2
}{
5
}
.
4.
Press
{A}
or
{B}
repeatedly to select “
ON
”.
5.
Press
{
SET
}
.
6.
Enter the fax number.
7.
Press
{
SET
}
.
8.
Enter the transmission start time.
L
Press
{*}
repeatedly to select “
AM
” or
“
PM
”.
9.
Press
{
SET
}
.
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=ON
[
±
]
“
ON
” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 24).
“
OFF
”: The unit will not print the Caller ID list, but
keep a record of the information for the last 30
callers.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON
[
±
]
To receive a fax document that is longer than
your recording paper.
FL511E.book Page 38 Monday, June 30, 2003 5:55 PM
