1. Introduction and Installation
14
1.7 Paper tray
Insert the paper tray (
1
) into the slot (
2
) on the
back of the unit.
Note:
L
Do not place the unit in an area where the
paper tray may be obstructed (i.e., by a wall,
etc.).
L
Keep this surface (
3
) away from walls etc.
more than 50 mm to let the unit cool down.
1.8 Paper stacker
Line up the slots (
1
) in the paper stacker with
the pegs (
2
) on the bottom of the unit, then
insert the two tabs of the paper stacker into the
slots on the unit (
3
).
Note:
L
Do not place the unit in an area where the
paper stacker may be easily bumped into.
L
Document and recording paper will be
ejected from the front of the unit. Do not place
anything in front of the unit.
L
The paper stacker can hold up to
approximately 100 sheets of printed paper.
Remove the printed paper before the paper
stacker becomes full.
1
2
3
2
1
3
FL511E.book Page 14 Monday, June 30, 2003 5:55 PM
