3. Telephone
34
Display while viewing
L
When the unit did not receive name
information, the display will show “
NO NAME
RCVD
”.
L
When no calls have been received, the
display will show “
NO CALLER DATA
”.
To edit a telephone number for calling back
Press
{*}
repeatedly after step 2. Each time
you press
{*}
, the telephone number will be
changed as follows:
1. 1 - Area code - Local telephone number (“1”
added)
2. Local telephone number (area code omitted)
3. Area code - Local telephone number
4. 1 - Local telephone number (“1” added and
area code omitted)
L
You can change the area code if it is
wrong by pressing the correct number
using the dial keypad.
To stop viewing
Press
{
STOP
}
after step 2.
3.8 Printing the Caller’s list
L
Keep the front cover page open for button
locations.
1
Press
{
CALL DISPLAY PRINT
}
to start
printing.
L
The display will show “
ALL ERASE OK?
”
after printing.
2
Press
{
STOP
}
to exit the program.
L
To erase all of the stored caller
information, press
{
SET
}
instead of
{
STOP
}
.
3.9 Erasing caller
information
L
Keep the front cover page open for button
locations.
3.9.1 Erasing all caller
information
1
Press
{
MENU
}
repeatedly to display
“
CALLER SET UP
”.
2
Press
{
SET
}
.
3
Press
{
SET
}
.
L
To cancel erasing, press
{
STOP
}
, then
{
MENU
}
.
4
Press
{
SET
}
.
5
Press
{
STOP
}
to exit the program.
3.9.2 Erasing specific caller
information
1
Press
{
CALL DISPLAY SEARCH
}
.
2
Press
{A}
or
{B}
repeatedly to display the
desired entry.
3
Press
{<}
.
L
To cancel erasing, press
{
STOP
}
2 times.
4
Press
{
SET
}
.
L
To erase other entries, repeat steps 2 to
4.
5
Press
{
STOP
}
to exit the program.
3.10 Storing caller
information
Important:
L
This feature is not available in the
following cases.
–
The telephone number includes data
other than numbers (i.e.,
*
or #).
–
The caller information does not
include a telephone number.
L
Keep the front cover page open for button
locations.
1
Press
{
CALL DISPLAY SEARCH
}
.
2
Press
{A}
or
{B}
repeatedly to display the
desired entry.
3
Press
{
DIRECTORY PROGRAM
}
.
4
Select the station key or navigator directory.
For stations 1–3:
1.
Press the desired station key.
2.
Press
{
SET
}
.
3.
Press
{
SET
}
.
For stations 4–11:
1.
Press the desired station key.
2.
Press
{
SET
}
.
For stations 12–22:
1.
Press
{
LOWER
}
, then press the desired
station key.
FL511C-en.book Page 34 Thursday, May 15, 2003 11:51 AM
