8. Help
54
L
If you replace only the toner cartridge, tap on the
used toner cartridge several times to allow the
remaining toner to fall into the drum unit before
removing.
6
Turn the two levers (
1
) on the used toner cartridge
firmly, until the triangles (
2
) match.
7
Remove the used cartridge (
1
) from the drum unit
(
2
).
L
The toner may stick to the cartridge and the drum
unit. Be careful when handling. See page 4 for
details.
L
Do not drop the toner on the black drum surface
(
3
).
L
Put the used toner cartridge into the protection
bag.
8
Insert the cleaner (
1
) fully into the groove (
2
) of the
drum unit and move it from side to side at least 3
times to clean the inside of the drum unit.
L
Repeat for the other groove.
Note:
L
Be sure to clean all the way to the edge of each
groove.
9
If you replace the drum unit at the same time,
remove the new drum unit from the protection bag.
Place the new toner cartridge (
1
) into the drum unit
(
2
) vertically.
10
Turn the lever (
1
) on each side of the toner cartridge
while pressing down firmly.
1
2
1
2
3
1
2
1
2
1
FL313HK-PFQX2630ZA-en.book Page 54 Tuesday, August 29, 2006 10:19 AM