1. Introduction and Installation
12
1.6 Paper tray
Insert the paper tray (
1
) into the slot (
2
) on the back of
the unit.
Note:
L
Do not place the unit in an area where the paper tray
may be obstructed (i.e., by a wall, etc.).
L
Keep this surface (
3
) away from walls etc. more
than 50 mm to let the unit cool down.
1.7 Paper stacker
Line up the slots (
1
) in the paper stacker with the pegs
(
2
) on the bottom of the unit, then insert the two tabs of
the paper stacker into the slots on the unit (
3
).
Note:
L
Do not place the unit in an area where the paper
stacker may be easily bumped into.
L
Document and recording paper will be ejected from
the front of the unit. Do not place anything in front of
the unit.
L
The paper stacker can hold up to approximately 30
sheets of printed paper. Remove the printed paper
before the paper stacker becomes full.
1
2
3
3
2
1
FL313HK-PFQX2630ZA-en.book Page 12 Tuesday, August 29, 2006 10:19 AM