9. Programmable Features
74
9.5.1 Programmable functions
Helpful hints:
L
To exit programming, press
{ih}
at any
time.
9.5.2 Memo alarm
Setting memo alarm
An alarm will sound for 3 minutes at the set time
once or daily. 3 different alarms can be set. A text
memo can also be displayed.
Set the date and time beforehand (page 26).
1.
Press
$
(centre of joystick).
2.
Select
t
, then press
,
.
3.
Select
“
Memo Alarm
”
, then press
,
.
4.
Push the joystick up or down repeatedly to
select an alarm (1 to 3).
L
Times and memos for previously set
alarms will be displayed. To delete the
previous setting, press
_
, select
“
Yes
”
, then press
,
.
5.
Press
,
.
6.
Select an alarm mode, then press
,
.
“
Off
”
(default): Turns the alarm OFF.
L
If you select
“
Off
”
skip to step 13.
“
Once
”
: The alarm will sound once at the set
time. Enter the desired date and month by
selecting 2 digits for each.
“
Daily
”
: An alarm will sound daily at the set
time.
7.
Enter the desired hour and minute by
selecting 2 digits for each.
8.
Press
/
repeatedly to select
“
AM
”
,
“
PM
”
,
or 24-hour time entry, then press
,
.
L
If you do not need to enter a text memo,
skip to step 10.
9.
Enter a text memo, up to 32 characters (see
page 88 for instructions).
10.
Press
,
.
11.
Select the ringer that will sound at the set
time.
12.
Press
,
.
13.
Press
,
.
14.
Press
{ih}
.
Note:
L
To stop the alarm, press
{C}
,
{ih}
,
{s}
,
{
0
}
to
{
9
}
,
{*}
,
{#}
or
{
INT
}
.
L
When the cordless handset is in talk or
intercom mode, the alarm will not sound until
the call has ended.
L
Memo alarm volume depends on cordless
handset ringer volume (page 25).
L
The alarm will sound at the set time even
when the ringer is turned OFF.
L
If you select
“
Once
”
, the setting will be
changed to
“
Off
”
after the alarm sounds.
9.5.3 Ringer options
Changing ringer types
You can select the ringer type for the cordless
handset from one of 15 types.
“
EXT Ringer Type
”
: Selects the ringer heard
for outside calls.
“
INT Ringer Type
”
: Selects the ringer heard
for intercom calls.
“
Paging Tone
”
: Selects the ringer heard when
all cordless handsets are paged.
“
Private Ring
”
: Allows you to set a different
ringer for each private category (for Caller ID
service users only, page 38).
1.
Press
$
(centre of joystick).
2.
Select
s
, then press
,
.
3.
Select the desired item, then press
,
.
L
The ringer sounds using the current
ringer type.
L
If you select
“
Private Ring
”
choose
the desired category, then press
,
.
4.
Select the desired ringer type, then press
,
.
5.
Press
{ih}
.
Note:
L
If you select one of the melody ringer types,
the ringer will continue to sound for 10
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one
on the line when you answer a call.
L
The preset melodies in this product are used
with permission of M-ZoNE Co., Ltd.
L
To set the base unit ringer type, see feature
#17 on page 67.
$
/
,
/
/
_
{ih}
{
INT
}
{C}
{s}
FC243AL-PFQX2096ZA-en.book Page 74 Thursday, September 30, 2004 3:37 PM
