Troubleshooting
Problem
Cause/solution
The repeater does not work.
R
When the indicators do not turn on, the AC adaptor is not
connected properly. Check the connections.
R
When the indicators do not turn green, move the repeater
closer to the base unit.
R
Registration may have been canceled.
Deregister the repeater, then re-register.
Deregister
1
Unplug the AC adaptor, then press and hold the
PROGRAM button.
2
While pressing and holding the PROGRAM button,
re-connect the AC adaptor.
3
Keep pressing and holding the PROGRAM button for
about 10 seconds until the STATUS indicator stops
flashing and RSSI/ID indicator turns red. Then release
the PROGRAM button.
R
The STATUS indicator and the RSSI/ID indicator turn
amber for about 2 seconds and the STATUS indicator
flashes red again.
R
If the STATUS indicator flashes green after releasing the
PROGRAM button, deregistration failed. Deregister the
repeater again.
Re-register
Unplug the AC adaptor, then perform from step 2 of
“Installation/Registering the Repeater”.
While talking using the handset, sound
cuts in and out.
R
The handset is out of range. Move the handset closer to
the repeater.
A repeating tone is heard while talking
using the handset.
or
The STATUS indicator is amber and
the RSSI/ID indicator flashes green.
R
The PROGRAM button was pressed. The repeater is in
programming mode. To exit, press the PROGRAM button
again. Do not press the PROGRAM button, except when
deregistering the repeater.
28
3. Linking to Digital Cordless Phones
