Registering the Repeater
Easy Registration
In easy registration, the repeater can be registered to a CS easily.
Note
R
Easy registration cannot be performed if the repeater is already registered to another CS. In this case,
de-register the repeater before attempting easy registration. For details about the de-registration
procedure, refer to "De-registration".
R
We recommend that you power down any CS that you do not wish to connect to the repeater prior to
registration.
1
Turn on the repeater by connecting the AC adaptor.
The STATUS indicator and the RSSI/ID indicator will turn amber for 2 seconds.
2
If the repeater is unregistered, the STATUS indicator will flash red, and the repeater automatically
enters Easy Registration mode.
3
When the repeater has found a CS, the STATUS indicator will turn green.
Registration is complete.
Manual Registration
In manual registration, the repeater can be registered to another repeater to create a cascade
configuration.
Note
It is necessary to check the ID of the repeater you are attempting to register to (destination repeater) just
before starting the manual registration.
1
Check the ID of the destination repeater.
a. In Operation mode, press the destination repeater’s PROGRAM button to switch to ID
Confirmation mode.
The ID is indicated by the number of times the RSSI/ID indicator flashes green.
b. Return the destination repeater to Operation mode by pressing the PROGRAM button again.
16
1. Linking to Cell Stations
