Panasonic KW4M, Руководство пользователя

Страница: 19 / 47

13
5-2-3 MODE2
(Mode for setting each parameter for pulse measurement.
This mode doesn’t show when power measurement is selected.)
＜
MODE
＞
+
＜
A
＞
Max. counting speed setting mode
H z
Mode defines max. counting speed.
・
Select from 2kHz/30Hz
Pre-scale setting mode
P S C L
Mode defines pre-scale value used for change count value.
・
It can be set the range of 0.001 to 100.000. (Initial 1.000
）
・
The position of decimal point set with this mode is applied to count value and preset value.
ex) When 0.01 (Last 2-digit) is set, the decimal point of count value and preset value has 2 digit
under decimal point.
Unit setting mode
U N I T
Mode defines unit used for count value display.
・
Select from CNT/l/kl/m
3
.
Set CNT l kl m
3
Display
C N T

k

m 3
※
Count value does not change even if the unit setting is changed during counting.
Normal display
↓
<MODE>
MODE display
↓
< A >
Max. counting speed setting mode Factory setting / Display
・
Press <kW/kWh> to change max. counting speed.
・
Max. counting speed is selected from
2000(2kHz)
→
30
（
30Hz
）
.
↓
<SET>
Pre-scale setting mode Factory setting / Display
・
Enter pre-scale value using
<kW/kWh>,< A >,< V >,<CHARGE>,<TIME>,<COUNT> .
・
Pre-scale value can be entered the range of 0.001 to
100.000.
･
The position of decimal point set with this mode is
applied to count value and preset value.
↓
<SET>
Unit setting mode Factory setting / Display
・
Press <kW/kWh> to change unit.
・
Unit is selected from CNT
→
l
→
kl
→
m3.
↓
<SET>
Normal display