6.2.1.3 Notes about Documents for Scanning
•
Depending on the paper type, scanning results may be poor when you scan incompatible documents, or
even documents that should be compatible.
If scanned images are skewed, paper jams occur, or double feeding occurs, try scanning again after
doing the following:
–
Clean the inside of the scanner (page 94).
–
Reduce the number of sheets of paper loaded on the feed tray.
–
Change the orientation (portrait/landscape) of the placed documents.
–
In the scan settings, set "Feeding Speed" to [Slow].
–
Scan the documents using manual feeding.
–
Scan using Small/Thin Paper Mode (page 52) if you are scanning thin paper or paper whose length
is 110 mm (4.33 in.) or less.
*1
For details about configuring the scan settings, refer to the Image Capture Plus, TWAIN, or ISIS help.
•
When scanning important documents, confirm that the number of scanned images matches the number
of pages in the feed tray. Also, check the condition of the scanned documents.
6.2.1.4 Notes about Double Feed Detection
This unit uses an ultrasonic sensor to detect double feeding (where two or more sheets of a document are
fed at the same time).
•
Double feeding cannot be detected with unsupported paper types.
•
Double feed detection is not available when using manual feeding.
6.2.1 About Documents for the ADF
45