Operation Panel
1
Icon and LED of nanoe
TM
X: display the current status of nanoe
TM
X mode.
2
Icon and LED of ECONAVI: display the current status of ECONAVI operation.
3
LED of compartments: the icon of the respective compartment will light up when the
compartment is selected.
4
Temperature and time display area: display the temperature of Fridge room, Freezer room,
Prime Fresh room and the time for modes of the Prime Freeze.
5
Temperature control button of Fridge room.
6
Temperature control button of Prime Fresh room.
7
Control button and LED of Prime Fresh+.
8
Temperature control button of Freezer room.
9
LED of Quick Freezing.
0
Control button and LED for modes of Prime Freeze.
a
Control button and LED of Quick Ice Making.
b
Control button and LED of Auto Ice Off.
c
LED of Auto Ice Clean.
d
Control button and LED of Child Lock.
Remark
●
On the Operation Panel: “*Extra function: Press 3 sec”, means that you need to press and
hold the button beginning with “*” mark for 3 seconds when you want to start the extra
functions.
● Under normal conditions, the Operation Panel light will turn off. When you press the
buttons, the Operation Panel light will turn on. The Operation Panel light will turn off and all
the buttons will not be operated when the refrigerator door is opened.
● In summer, when the temperature is high, if you put uncooled food in the refrigerator or open/
close the refrigerator doors repeatedly, the temperature inside will increase and the displayed
value will be higher than the setting temperature. Therefore, it is necessary to reduce doors
opening times.
● When first plugged in, the Operation Panel will display the introduction of modes and the
temperature of compartments for about 10 seconds. Buttons will not be active during this
period of time. After 10 seconds, the Operation Panel can be adjusted normally.
1
2
3
4
5
6 7
8
9
0
a
c
d
b
14
