Once every 3 months
Moisture control of vegetable case
1
After pulling out the Vegetable case, the Moisture control is located at the back of the
Vegetable case.
2
Slide the Moisture control upward to remove it.
Remark
●
After cleaning by water, wipe it or let it dry.
●
For tough stains, dilute (neutral) kitchen detergent, and gently wash with a soft toothbrush,
then rinse thoroughly with water.
Once every 3 months
Prime Fresh
Removing
1
Fully open both doors of the Fridge room
2
Remove Bottle shelves
5
(According
to Parts identification in Page 12, 13
before removing the Vegetable case.)
3
Pull the case forward until it reaches
the end and gently lift the front of the
case to remove it completely.
Attaching
1
Insert the case into the shelf.
2
Gently lift the case and push forward
until it reaches the end.
3
Install Bottle shelves
5
into the
doors.
Weekly
Water tank/Water filter (of the Auto Ice maker)
1
Open the lid and clean the Water tank with water.
2
Rotate the Water filter to remove the hook and
remove the Water filter.
3
Gently wash the Water filter in water.
4
Remove the seal rubber on the edge and clean it
with water
5
Put the Water filter and rubber back into place.
Remark
●
If there is water deposits or pipe blockages in the
Water filter, ice may not be made properly.
Water supply tank
Water filter
Rubber gasket
29
