![background image](http://html.mh-extra.com/html/panasonic/i-pro-wv-sp102/i-pro-wv-sp102_installation-manual_277522024.webp)
24
Important:
• Be sure to use the power cord plug (accessory) provided with this product.
• Be sure to fully insert the power cord plug (accessory) into the 12 V DC power supply terminal.
Otherwise, it may damage the camera or cause malfunction.
• Mount the camera so that excessive force is not applied to the power cord.
• Be sure to use an AC adapt
or compliant with the Specifications regarding power source and
power consumption (
☞
p.29).
●
When using PoE (IEEE802.3af compliant)
Connect a LAN cable (category 5 or better, straight) between a PoE device (such as a hub) and the
network connector of the camera.
Important:
• Use all 4 pairs (8 pins) of the LAN cable.
• The maximum cable length is 100 m {328'}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply,
12 V DC power supply will be used for power supply.
• When the LAN cable is disconnected once, reconnect the cable after
around 2 seconds. When
the cable is quickly reconnected, the power may not be supplied from the PoE device.