background image

1.4 Answering Features

Feature Guide

69

1.4.1.4

Hands-free Answerback

Description

A PT user with a speakerphone can talk to a caller without lifting the handset. If the user 
receives a call in Hands-free Answerback mode, a hands-free conversation is established in 
the following method:

Conditions

Hands-free Answerback applies to:
Intercom calls and trunk calls, including calls directed to an incoming call distribution group 
in UCD or Priority Hunting distribution method. (

 1.2.2.2 Group Call Distribution)

Hands-free Answerback for Trunk Calls
System programming is required to use this feature.

Secret Monitor
The beep tone which the called party hears before answering can be eliminated through 
system programming.

Alternate Receiving/Calling Mode (Ring/Voice) Override
Hands-free Answerback overrides the Alternate Receiving mode preset on the telephone 
and the Alternate Calling mode from the caller.

Hands-free Answerback with Headset
The Hands-free Answerback feature can also be used with a headset.

Feature Guide References

1.5.3 Intercom Call

User Manual References

User Manual

1.3.2 Answering Hands-free (Hands-free Answerback)

Type

Answering Method

Intercom Call

Established immediately after a beep tone at the called extension 
and the caller hears a confirmation tone.

Trunk Call*

Established after a specified number of rings, a called extension 
hears a beep tone.

*: Including a call from an extension that placed a trunk call on a consultation hold.

Содержание HYBRID IP-PBX KX-TDA100





























































































































































































































































































































































































Отзывы: