Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 380

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 3

Feature Guide

3

Installation Manual

Provides instructions for installing the hardware and maintenance of the PBX.

User Manual

Provides operating instructions for end users using PTs, SLTs, PSs, or DSS Consoles.

Trademarks

•

Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.

•

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.

•

All other trademarks identified herein are the property of their respective owners.

•

Screen shots reprinted with permission from Microsoft Corporation.

Notes

•

There are some optional service cards, PTs, and features which are not available in
some areas. Additionally, there are some optional service cards and features for the
KX-TDA100/KX-TDA200 which are not available for the KX-TDA15/KX-TDA30, or
vice versa. Please consult your certified Panasonic dealer for more information.

•

Displays are described in English as samples.

•

While all system programming can be performed through PC programming (

2.3.1

PC Programming), PT programming can only cover a subset (

2.3.2 PT

Programming). In Section 1 Call Handling Features and Section 2 System
Configuration and Administration Features, programming references such as "

Date & Time [000]" indicate that system programming can be done by PT
programming.

The KX-TDA15E/KX-TDA30E, the KX-TDA15NE/KX-TDA30NE, the KX-TDA15GR/KX-
TDA30GR, and the KX-TDA30CE are designed to interwork with the:
Analogue Public Switched Telephone Network (PSTN) of a European country
Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access

The KX-TDA100E/KX-TDA200E, the KX-TDA100NE/KX-TDA200NE, the KX-TDA100GR/
KX-TDA200GR, and the KX-TDA100CE/KX-TDA200CE are designed to interwork with the:
Analogue Public Switched Telephone Network (PSTN) of a European country
Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access
Pan-European Integrated Services Digital Network (ISDN) using ISDN primary rate access
ONP 2048 kbit/s digital structured leased lines (D2048S)

We, Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd.,
declare that this equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
If you would like to receive a copy of the original Declaration of Conformity of our products which
relates to the R&TTE, please visit our web address:

http://doc.panasonic.de

«
1
2
3
4
5
...
»

Содержание HYBRID IP-PBX KX-TDA100





























































































































































































































































































































































































Отзывы:

Нет отзывов