23
(ENG) SQT0885
4
Attach this unit to the Multi Mount as
shown in the figure.
≥
Before attaching this unit, fasten the Multi Mount securely with the band and the hook and loop
fastener.
1
While holding the tightening nut
A
, tighten the
adjustment knob
B
by rotating it towards LOCK.
2
While holding the adjustment knob
B
, loosen the
the adjustment belt
C
until this unit can be passed
through it by rotating the tightening nut
A
towards UNLOCK.
3
Pass this unit through the adjustment
belt
C
so that this unit is in the position
shown in the figure.
4
While holding the adjustment knob
B
, tighten the
adjustment belt
C
by rotating the tightening nut
A
towards LOCK until this unit is fastened securely.
≥
Adjust the adjustment belt with hands. Do not apply too much
force.
≥
Do not rotate the tightening nut more than necessary after
fastening this unit.
≥
Check the left/right tilt of this unit after fastening it.
≥
To correct the left/right tilt of this unit, loosen the adjustment belt.
Attaching this unit to the Multi Mount
LOCK
UNLOCK
LOCK
HX-A1M-SQT0885_mst.book 23 ページ 2015年6月1日 月曜日 午前9時58分