19
(ENG) SQT0885
∫
Preparations before connection
1
Install the smartphone application “Image App” on your smartphone. (
l
18)
2
Turn on the Wi-Fi function of your smartphone.
≥
For further details, please read the operating instructions for the smartphone.
Setting up a Wi-Fi connection to a smartphone
≥
Check that the Wi-Fi lamp is off.
1
Press and hold the recording mode/Wi-Fi button for at least
1 second (approx.), and remove your finger.
≥
The Wi-Fi lamp will flash red.
2
Tap the SSID of this unit (below) on the Wi-Fi network
screen of the smartphone.
≥
Password entry screen is displayed.
3
Enter password (below).
≥
When the connection is complete, the Wi-Fi lamp of this unit will light red.
Use your smartphone to set up this unit.
Preparation:
1
Set up a Wi-Fi connection between this unit and the smartphone.
2
Start up the smartphone application “Image App”.
≥
If a connection attempt to this unit fails, turn off and on the Wi-Fi function using the setup
menu of the smartphone, and then retry the connection.
≥
For more information, refer to the [Help] in the “Image App” menu.
Preparation
Connecting to a smartphone
Default setting
SSID:
Password:
A1-wearable
a12345678
Preparation
Setting up this unit
≥
When you start “Image App” connecting with this unit for the first time, a message
asking you to set the date and time will appear. (This message will also be displayed if
this unit remains unused for a long period of time.)
Follow the message to set the date and time.
≥
When you turn on this unit for the first time, a message asking you to change the SSID/
Password will appear. Be sure to change them. Otherwise, third parties may intercept
your information or use it for malicious purposes.
HX-A1M-SQT0885_mst.book 19 ページ ２０１５年６月１日 月曜日 午前９時５８分
