22
SQT0885 (ENG)
4
Fasten the Multi Mount securely by aligning the two
fasteners to one another.
≥
Fasten securely to prevent the Multi Mount from falling off.
≥
Dust, etc. adhering to the hook and loop fastener will weaken the
adhesion. Before attaching it, check if dust, lint, etc. is adhering.
5
Attach this unit to the Multi Mount as shown in the
figure. (
l
23)
≥
When removing the Multi Mount, do not pull the Multi Mount. Remove it by peeling off the hook
and loop fastener from the edge.
≥
Do not peel off the double sided tape attached to the hook and loop fastener. Once the tape is
peeled off, the adhesion weakens, making the tape unusable.
≥
When attaching the Multi Mount, check if the hook and loop fastener is fastened securely and the
adhesion of the double sided tape has weakened.
≥
Before attaching the Multi Mount, remove the hook and loop fastener from the Multi Mount.
1
Tuck a shoulder strap of a backpack or
similar item between the Multi Mount
and the band, and pass the band
through the portion
A
to hold the Multi
Mount in position.
≥
Before attaching the Multi Mount, check that the
hook and loop fastener side of the band is facing up.
≥
Move the Multi Mount to the position where you
want to attach it.
2
Pass the band through the ring
B
as shown in the
figure.
3
Fold the band inwards as shown in the figure, and
fasten it with the hook and loop fastener
C
of the
band.
Attaching to the shoulder strap of a backpack, etc.
HX-A1M-SQT0885_mst.book 22 ページ 2015年6月1日 月曜日 午前9時58分