Panasonic HDC-Z10000, Руководство по эксплуатации

Страница: 69 / 144

- 69 -
Zebra
Zebra display:
Parts where white saturation (colour saturation) is likely to occur (extremely brightly lit or
shiny parts) are displayed with diagonal lines (zebra pattern).
Marker display:
Displays the luminance level of the centre of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
≥
Marker display is displayed between 0% and 99%. It will be displayed as 99% when it is
over 99%.
≥
You can record an image with little white saturation if you manually adjust the shutter
speed or brightness. (
l 47, 49)
≥
The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed. ( l 116)
Colour Bar Screen
≥
To cancell, press the BARS button again.
≥ It will be cancelled when the unit is turned off.
≥ While the colour bar is displayed, a test tone will be output from the headphone terminal,
HDMI terminal and AV multi terminal. (The test tone that is output will be 997 Hz when [24p
SELECT] is set to [OFF], and 1 kHz when [24p SELECT] is set to [ON].) It will not be output
from the speaker of this unit.
≥
It is possible to record the colour bar screen.
ZEBRA button
It will switch between the zebra display and the marker display every time the button is
pressed.
Zebra 1
#
Zebra 2
*
#
Marker
*
#
setting cancelled
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (
l
117)
BARS button
Press the BARS button to output a colour bar screen to a television or monitor so you can
adjust them.