background image

- 135 -

When using a chemical dust cloth, follow 
the instructions that came with the cloth.

Do not use the unit for surveillance 
purposes or other business uses.

This unit was designed for consumer 
intermittent use. It was not intended for 
continuous use, or for any industrial or 
commercial application resulting in 
prolonged use.

In certain situations, continuous use could 
cause the unit to overheat and cause a 
malfunction. Such use is strongly 
discouraged.

When you are not going to use the unit 
for an extended time

When storing the unit in a cupboard or 
cabinet, it is recommended that you place 
a desiccant (silica gel) in with it.

Do not lift up this unit by the handle with 
the tripod still attached

When the tripod is attached, its weight will 
also affect the unit’s handle, possibly 
causing the handle to break and hurting 
the user.

To carry the unit while the tripod is 
attached, take hold of the tripod.

Do not swing the unit around, shake it by, 
or allow it hang from the handle

Do not jar, swing, or shake the unit by its 
handle. Any strong jolt to the handle may 
damage the unit or result in personal 
injury.

Do not allow the cord to drag on the 
ground or pull a connected cord along 
the passage

The cord will be damaged, causing fire or 
electrical shock, when the cord gets 
caught by the feet, excite will also cause 
personal injury.

The battery used in this unit is a 
rechargeable lithium-ion battery. It is 
susceptible to humidity and temperature and 
the effect increases the more the 

temperature rises or falls. In cold areas, the 
full charge indication may not appear or the 
low battery indication may appear about 
5 minutes after starting use. At high 
temperatures, the protection function may 
be triggered, making it impossible to use the 
unit.

Be sure to detach the battery after use.

If the battery is left attached, a minute 
amount of current continues to flow even if 
the unit is off. Keeping the unit in this state 
may result in over discharge of the battery. 
This may result in you not being able to 
use the battery even after it is charged.

The battery should be stored in the vinyl 
bag so metal does not come into contact 
with the terminals.

The battery should be stored in a cool 
place free from humidity, with as constant 
temperature as possible. (Recommended 
temperature: 15

o

C to 25

o

C, 

Recommended humidity: 40%RH to 
60%RH)

Extremely high temperatures or low 
temperatures will shorten the life of the 
battery.

If the battery is kept in high-temperature, 
high-humidity, or oily-smoky places, the 
terminals may rust and cause 
malfunctions.

To store the battery for a long period of 
time, we recommend you charge it once 
every year and store it again after you 
have completely used up the charged 
capacity.

Dust and other matter attached to the 
battery terminals should be removed.

Prepare spare batteries when going out 
for recording.

Prepare batteries enough to last for 3 to 4 
times the period you are planning to 
record for. Cold places such as a ski resort 
can shorten recording time.

If you drop the battery accidentally, 
check to see if the terminals are 
damaged.

About the battery

Содержание HDC-Z10000

















































































































































Отзывы: