Panasonic HDC-Z10000, Руководство по эксплуатации

Страница: 52 / 144

- 52 -
∫
Using an external microphone or audio equipment
≥
Set [MIC SETUP] to [2ch]. ( l 50)
1
Connect an external microphone or audio
equipment to AUDIO INPUT1,2 terminals
(XLR 3 pin). (
l
8)
2
Use INPUT1,2 (LINE/MIC) switches to
switch the connected audio input signal.
LINE : audio equipment is connected
Input level is 0 dBu.
MIC : an external microphone is connected
Input level is -50 dBu.
≥
When [EXT. MIC GAIN1] or [EXT. MIC GAIN2] is set to
[-60dB], the input level is set to -60 dBu. (
l
115)
3
(When using the phantom microphone (which
re48 V power supply))
Set the INPUT1,2 (+48V) switches to ON.
ON : +48 V power supply to audio input terminals 1, 2 (XLR 3 pin).
OFF : No power supply for audio input terminals 1, 2 (XLR 3 pin).
4
Use the CH1 switch to select the input signal to be recorded to audio
channel 1.
INT(L) : Audio from the built-in microphone L (left) ch is recorded to audio channel 1.
INPUT1 : Audio from a device connected to audio input terminal 1 (XLR 3 pin) is recorded to
channel 1.
INPUT2 : Audio from a device connected to audio input terminal 2 (XLR 3 pin) is recorded to
channel 1.
5
Use the CH2 switch to select the input signal to be recorded to audio
channel 2.
INT(R) : Audio from the built-in microphone R (right) ch is recorded to audio channel 2.
INPUT2 : Audio from a device connected to audio input terminal 2 (XLR 3 pin) is recorded to
channel 2.
A
AUDIO INPUT2
terminal (XLR 3 pin)
B
AUDIO INPUT1
terminal (XLR 3 pin)