73
VQT2M75
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥
Change the mode to
.
≥
Switch to Manual Mode. (
l
82)
≥
When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the
setting cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
≥
If wind sound cannot be reduced with the Wind noise canceler function alone, set [BASS
SETTING] to [LOWCUT]. (
l
75)
Recording setting of the built-in microphone can be adjusted.
≥
Change the mode to
.
≥
Switch to Manual Mode. (
l
82)
≥
If you wish to record higher quality sound and maintain realism even when zooming in, for
instance, when recording a music recital, we recommend setting [MIC SETUP] to
[SURROUND].
[WIND NOISE CANCELER]
: [RECORD SETUP]
#
[WIND NOISE CANCELER]
#
[ON]
[MIC SETUP]
: [RECORD SETUP]
#
[MIC SETUP]
#
desired setting
[SURROUND]:
Sound is recorded with 5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone is synchronized with the zoom
operation. Sounds near the front of the unit are recorded more
clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
[FOCUS MIC]:
Directivity of the center is enhanced for recording audio
near the front of the unit more clearly.
[STEREO MIC]:
Sound from two directions is recorded in 2 ch by forward-
facing stereo microphones.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 73 ページ ２０１０年２月２３日 火曜日 午前１０時３４分
