136
VQT2M75
Problem
Check points
Item other than the
touched one is
selected.
≥
Calibrate the touch screen. (
l
51)
The remote control
does not function.
≥
[REMOTE CONTROL] of the [SETUP] is [OFF].
(
l
53)
≥
The button-type battery of the remote control may
have run out. Replace it with a new button-type
battery. (
l
53)
The remaining time
indication or the
elapsed time indication
is not shown.
≥
[DISPLAY] of the [SETUP] is [OFF]. (
l
46)
The unit arbitrarily
stops recording.
≥
Use an SD card that can be used for motion picture
recording. (
l
27)
≥
The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card, built-in memory or HDD. (
l
51)
≥
If [AGS] is [ON], record in the normal horizontal
position or set [AGS] to [OFF]. (
l
71)
≥
If the unit is exposed to strong vibrations or shocks
while recording on HDD, recording may stop to
protect the HDD. If the unit is used in a place with
loud sounds, the recording may stop due to sound
vibrations. Recording data on an SD card is
recommended in these places.
Auto focus function
does not work.
≥
Switch to Intelligent Auto Mode.
≥
If you are trying to record a scene which is hard to
bring into focus in Auto Focus Mode, use the Manual
Focus Mode to adjust the focus. (
l
40, 85)
Color balance of
images is strange
when recording in a
place such as a
gymnasium.
≥
In a place with multiple light sources, such as a
gymnasium or a hall, set the white balance setting to
(Indoor mode2). If you cannot record clearly
with the
(Indoor mode2), set it to
(Manual
adjustment mode). (
l
83)
HDC-TM700&HS700P&PC-VQT2M75_mst.book 136 ページ ２０１０年２月２３日 火曜日 午前１０時３４分
