57
VQT1Y59
Recording
Recording (Basic)
6
AF tracking
It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)
¬
Change the mode to
or
.
1
Touch .
A
Target frame
≥
will be displayed on the screen.
≥
The prioritized face framing (orange) will
change to the target frame when the
Intelligent auto mode is
(Portrait), and
it will track the face that was framed.
≥
Available target lock range will be displayed
in red frame when the Intelligent auto mode
is set to anything but
(Portrait).
2
Touch the object and lock the target.
≥
When you touch the head of the object, the
target frame on the head gets locked and
tracking starts.
≥
Touch the object to be changed again
when you want to change the target.
≥
When the Intelligent auto mode is selected,
the setting becomes
(Normal) and
touched object is tracked. Selection
becomes
(Portrait) when target frame
is locked on head.
3
Start recording.
≥
When you touch [CANCEL], the tracking
function will be cancelled.
∫
About target frame
≥
The frame out assist
B
is displayed when the
target frame gets close to framing out.
≥
When target lock fails, the target frame blinks in
red and then disappears. In such cases, touch
the object again and lock the target.
≥
When the
button is pressed halfway, the
focus is set to the object that is locked. The
target frame turns green when it focuses, and
the target cannot be changed.
≥
This function cannot be used in manual mode.
≥
This function cannot be used when the scene
mode is set to the fireworks mode in still
picture recording mode.
≥
It may track different objects or may not lock
the target depending on the recording
conditions such as the following:
j
When the object is too large or too small
j
When colour of the object is similar to the
background
j
When using zoom
j
When the camera is shaking
j
When more than one object overlaps
j
When the scene is dark
j
When the subject moves quickly
≥
When the target is locked in still picture
recording mode, the screen may become dark
or the AF assist lamp may turn on.
≥
A message will be displayed when an object
becomes unable to be tracked half-way through.
In such cases, touch the object one more time.
≥
AF tracking will be cancelled in the following cases.
j
When the mode is changed
j
When the power is turned off
j
When the scene mode is set
j
When the Intelligent auto mode is set on/off
≥
After setting [DISPLAY] to [OFF] if no operation
is performed for about 3 seconds, the operation
icon disappears. Touch the screen to display
the icon again. When the AF tracking is used,
the icon does not disappear.
HDCTM200&HS200GN-VQT1Y59_mst.book 57 ページ ２００９年１月１５日 木曜日 午後７時３２分
