36
VQT1Y59
Perform the touch screen calibration if a different
object to the one touched is selected.
1
Select the menu. (
l
27)
≥
Touch [ENTER].
2
Touch [
r
] with the supplied
stylus pen and enter in
calibration.
≥
Touch the [
i
] in the order it is displayed.
(5 locations)
3
Touch [ENTER].
≥
Calibration cannot be performed when the LCD
monitor is turned 180
o
.
≥
The intelligent auto mode is set to off.
(
l
40)
Select the menu. (
l
27)
[DYNAMIC]:
The image on the LCD monitor becomes clear
and vivid. Optimum contrast and brightness are
set depending on the scenes recorded. Clear
and brilliant images are presented.
[NORMAL]:
Switches to the standard picture quality.
≥
When the [POWER LCD] is set to
or
,
it is set to [DYNAMIC], or when the [POWER
LCD] is set to
or
, it is set to
[NORMAL], and the setting cannot be
changed.
¬
Change the mode to
or
.
Rotate the LCD monitor towards the
lens side.
≥
The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
≥
Only some indications will appear on the
screen. When
°
appears, return the direction
of the LCD monitor to normal position and
check the warning/alarm indication. (
l
129)
Touch screen calibration
[SETUP]
#
[CALIBRATION]
#
[YES]
Changing the picture quality
on the LCD monitor
[SETUP]
#
[LCD AI]
#
[DYNAMIC] or
[NORMAL]
Recording Yourself
+1
+2
-1
A
HDCTM200&HS200GN-VQT1Y59_mst.book 36 ページ ２００９年１月１５日 木曜日 午後７時３２分
