Panasonic HC-X1500 страница 149 Скачать руководство пользователя

Страница: 149 / 200

Chapter 6 Playback

—

Thumbnail operation

- 149 -

Playing back clips

In the [SYSTEM] menu

→

[FREQUENCY], select the system frequency to play back.

In the [SYSTEM] menu

→

[FILE FORMAT], select the file format to play back.

In the [SYSTEM] menu

→

[REC FORMAT], select the signal format and codec mode to play back.

Press the <THUMBNAIL> button.

The thumbnail screen is displayed.

Press the <MENU> button while the thumbnail screen is displayed.

The menu is displayed.

In the [THUMBNAIL] menu

→

[PLAYBACK]

→

[CLIP SEL], select the card slot of the memory card to play back.

[ALL SLOT]:

Displays all the clips recorded on every memory card in each card slot.

≥

Displays in the order of the clips in card slot 1, and then clips in the card slot 2 when MOV, MP4 or AVCHD is selected as the recording file format.

[SLOT1]:

Displays only the clips recorded on the memory card in card slot 1.

[SLOT2]:

Displays only the clips recorded on the memory card in card slot 2.

[SAME FORMAT]:

Displays only the clips recorded in the same format as the system format.

≥

Clips recorded in the same format match the current settings for each item of the [SYSTEM] menu

→

[FREQUENCY]/[FILE FORMAT]/[REC

FORMAT].

Select the clip to play back.

≥

is displayed on the clip that cannot be played back.

≥

To play back the clip with

displayed, check the information of the clip with the clip information, and try operating from the beginning again.

Playback from touch operations and operation icons

Direct playback bar

Playback operation

Operating procedure

Playback/pause

Touch

Fast-reverse playback

Touch

. Touch twice to increase the speed.

Fast-forward playback

Touch

. Touch twice to increase the speed.

Stop (return to thumbnail screen)

Touch

フビパヒブパ

ヶラュブペハペフ

ラユヷヤビパパ

ヶラュブペハペフ

フビパヒパパ

ヶラュビペハペヘ

ラユヷヤヒブパ

ヶラュビペハペヘ

フビビヒブパ

ヶラュビペハペヘ

フビパヒパパ

ヶラュビピハペベ

ラユヷヤヒブパ

ヶラュビピハペベ

フビビヒブパ

ヶラュビピハペベ

フビビヒパパ

ョラュブペハペフ

0001

00:00:00.00

0002

00:00:16.00

0003

00:00:32.15

0004

00:01:00.17

0005

00:01:24.02

0006

00:01:46.02

0007

00:02:30.20

0008

00:02:53.08

0009

00:03:30.20

TCR 12:59:59:23

CH1
CH2



Содержание HC-X1500









































































































































































































Результаты поиска

Содержание HC-X1500

Отзывы:

Похожие инструкции для HC-X1500

Бренды по названию

Популярные бренды

Panasonic HC-X1500, Руководство по эксплуатации

Результаты поиска

Содержание HC-X1500

Отзывы:

Похожие инструкции для HC-X1500

Бренды по названию

Популярные бренды