- 43 -
≥
Focus Assist is cancelled in following cases:
j
If you turn the unit off
j
If you press the THUMBNAIL button
j
When the setting of [FOCUS ASSIST] (
l
40
) is changed
j
When EVF/LCD detail is enabled. (
l
40
)
j
When you set this unit to Intelligent Auto Mode using the iA/MANU switch.
j
When you set the FOCUS A/M/
¶
switch to [A]
j
When you press the USER button to which [FOCUS TRANSITION] is registered or touch the
applicable USER button icon (
l
61
)
≥
The magnified display and peaking are not displayed on recorded images.
≥
The magnified display and peaking are not displayed on a TV.
≥
Freeze Frame is not available when you use Focus Assist. (
l
67
)
≥
Peaking may not be displayed when you use Digital Zoom (
l
65
). To zoom in and use peaking at
the same time, we recommend setting [FOCUS ASSIST] to [BOTH] and increasing the
magnification level of the magnified display.
(Notes on the magnified display of Focus Assist)
≥
Some information on the screen disappears when the screen is magnified.
≥
Still pictures cannot be recorded when the screen is magnified.
≥
In the following cases, the screen is not magnified during Focus Assist:
j
During motion picture recording or PRE-REC (
l
146
)
j
When using Digital Zoom
j
When using Area Mode (
l
68
)
≥
If you set the magnification level of the magnified display to 5.5
k
or higher, peaking may not be
displayed when using i.Zoom (
l
37
).
Focus Transition
You can use Focus Transition by registering “Focus Transition” to a USER button. With Focus
Transition, you can shift the current focus position to a pre-registered focus position.
≥
Please refer to page
61
for details about setting the USER button.
To use Focus Transition, you need to register a focus position.
≥
You can register up to three focus positions.
≥
Switch to Manual Mode. (
l
34
)
1
Select the menu.
≥
The current focus position will be registered as an initial position.
2
Adjust the focus by rotating the focus ring.
3
Touch the item to which you want to register the focus position.
≥
The icon of the item to which the focus position has been registered will be highlighted in yellow.
≥
To select a different item, perform the operations in Steps 2
s
3.
Registering a focus position
: [CAMERA SETUP]
#
[FOCUS TRANSITION]
#
[Setup]
[1]/[2]/[3]
MENU
