Panasonic HC-X1000 Скачать руководство пользователя

Страница: 21 / 180

- 21 -

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.

Open the SD card slot cover and
insert (remove) the SD card into
(from) the card slot

≥

One SD card can be inserted into each of the
card slot 1 and the card slot 2.

≥

Face the terminal side

in the direction

shown in the illustration and press it straight
in as far as it will go.

≥

Press the centre of the SD card and then pull
it straight out.

Securely close the SD card slot
cover.

≥

Do not touch the terminals on the back of the
SD card.

≥

Do not apply strong shocks, bend, or drop the
SD card.

≥

Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.

≥

When the card access lamp is lit, do not:

Remove the SD card

Turn the unit off

Insert and remove the USB cable

Expose the unit to vibrations or shock

Performing the above while the lamp is on
may result in damage to data/SD card or this
unit.

≥

Do not expose the terminals of the SD card to
water, dirt or dust.

≥

Do not place SD cards in the following areas:

In direct sunlight

In very dusty or humid areas

Near a heater

Locations susceptible to significant
difference in temperature (condensation
can occur.)

Where static electricity or electromagnetic
waves occur

≥

To protect SD cards, return them to their
cases when you are not using them.

≥

About disposing of or giving away the SD
card. (

174

)

When using a non Panasonic SD card for the first time, or one which was previously used on
another equipment, it is necessary to format the SD card. (

) When the SD card is formatted,

all of the recorded data is deleted. Once the data is deleted, it cannot be restored.







Access lamp

≥

When this unit is accessing the SD card,
the access lamp lights up.

Содержание HC-X1000





















































































































































































Результаты поиска

Содержание HC-X1000

Отзывы:

Похожие инструкции для HC-X1000

Бренды по названию

Популярные бренды

Panasonic HC-X1000, Руководство по эксплуатации

Результаты поиска

Содержание HC-X1000

Отзывы:

Похожие инструкции для HC-X1000

Бренды по названию

Популярные бренды