Panasonic HC-V110, Руководство пользователя

Страница: 85 / 120

- 85 -
2
Select [RECORDER] using the cursor button on the unit and press the
ENTER button.
≥
When you select an option other than [RECORDER], reconnect the USB cable.
≥ / /
When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
3
Select the media you wish to dub, then press the ENTER button.
≥
When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
4
Dub through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥
Do not press the ENTER button of the unit during dubbing.
≥
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥
When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB
cable while the unit is turned on, power is also supplied from the connected equipment to this
unit.
≥
For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
≥
When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, perform the
operations of Steps 1 to 4.
≥
You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc
recorder or DVD recorder. Disconnect the USB cable before performing either of these
operations.
≥
If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
About the screen indication of the unit
≥
When the unit is accessing the SD card, card access icon ( ) appears on the unit screen
or the access lamp is on.
≥
When the unit is accessing the built-in memory, built-in memory access icon ( ) appears
on the unit screen or the access lamp is on.
≥
Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
media, as this may result in the loss of recorded content.