- 76 -
Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in
this unit and a built-in memory.
∫
Check the used space of the copy destination
It is possible to check the used space of the SD card or built-in memory by [MEDIA STATUS]
(
l
39
).
≥
Depending on the media condition, some remaining capacity of the SD card or built-in memory
may not be used.
≥
If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards
following the instruction on the screen. In this case, the last scene copied to an SD card is
automatically divided to fit the space on the SD card.
≥
If you divide the scenes (
l
66
), and copy by scene selection, it is possible to copy matching the
remaining capacity of the media, or only the necessary parts.
≥
If there is not much remaining capacity in the SD card, a confirmation message asking to copy
after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
≥
Refer to page
77
for approximate time for copying.
1
Change the mode to
.
≥
Use a sufficiently charged battery or the AC adaptor.
2
Select the menu.
≥
When there is a scene that was relay recorded, a message is displayed. Select [YES] using the
cursor button and press the ENTER button, and copy after combining relay recorded scenes to
the SD card. (
l
69
)
Copy/Dubbing
Copying between SD card and Built-in
Memory
[HC-V210M]
Copying
: [COPY]
[
]
When copying from the SD card to the built-in memory
[
]*
When copying from the SD card to the USB HDD
[
]
When copying from the built-in memory to the SD card
[
]*
When copying from the built-in memory to the USB HDD
* Displayed only when connecting a USB HDD. (
l
78
)
Содержание HC-V110
Страница 120: ...Panasonic Corporation Web site http panasonic net ...
