88
VQT3Y11
∫
To disconnect USB cable safely
Select the
icon in task tray displayed on the PC, and then click [Eject Panasonic
Camcorder].
≥
Depending on your PC’s settings, this icon may not be displayed.
∫
Charging the battery by connecting it to different devices
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
≥
When connecting this unit to a PC for the first time, make sure to connect this unit to
the PC with this unit turned on.
≥
Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
≥
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥
During charging, the status indicator flashes.
≥
You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (
l
14)
≥
It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
≥
If the status indicator flashes at a particularly fast or slow rate, refer to page 104.
About the screen indication of the unit
≥
Do not disconnect the USB cable, the battery, or the AC adaptor while the access lamp
is on or card access icon (
) appears on the unit screen.
≥
Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp
is on or built-in memory access icon (
) appears on the unit screen.
≥
If the screen does not change when the unit is operated while connected to a PC,
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit
back on. (Data may be destroyed when above operation is performed while accessing
the SD card or built-in memory.)
HC-V100&V100MEB_VQT3Y11_mst.book 88 ページ ２０１２年１月８日 日曜日 午後２時１８分
