- 21 -
∫
Attaching the front microphone
≥
The microphone holder is set up so that a 21 mm external microphone (AG-MC200G: optional)
can be attached. Check in advance whether the microphone you wish to use can be attached.
1
Attach the microphone holder to the microphone holder attachment part.
≥
Attach by using a commercially available screw driver.
≥
When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2
Attach an external microphone
(optional) to the microphone holder,
and tighten the microphone holder
screw.
3
Connect the external microphone to
the AUDIO INPUT1 terminal (XLR 3
pin).
≥
When wiring the microphone cable, use the
cable clamper of this unit.
≥
Keep the microphone holder screw and
INPUT terminal cap out of reach of children
to prevent swallowing.
∫
Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.
A
Microphone holder attachment part
B
Microphone holder
C
Microphone holder mounting screws
D
AUDIO INPUT1 terminal (XLR 3 pin)
E
Microphone cable clamper
F
Microphone holder screw
G
External microphone (optional)
A
INPUT terminal cap
HC-PV100_GC_GW_SQW0750-1_mst.book 21 ページ 2018年11月16日 金曜日 午後5時14分