- 134 -
The recording lamp lights up during recording. When this is set to [OFF], it does not light during
recording.
Set date and time. (
)
Set the time difference from Greenwich Mean Time. (
The ring LED lights up blue in Recording Mode.
≥
When [5 SEC.] is set, the ring LED lights up for 5 seconds after the unit is turned on or the
Recording Mode is switched.
≥
When [RING LED (RED)] is set to [ON], the ring LED lights up red during recording.
The ring LED lights up red during recording.
≥
When the [REC LAMP] is set to [OFF], this item cannot be set.
The unit is put into recording pause approx. 1 second when the unit is turned on.
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the Quick Power On Mode, the zoom magnification becomes approx. 1
k
.
Touch screen operation, start and stop of recording can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the message displayed on the screen. (
[REC LAMP]
[ON]/[OFF]
[CLOCK SET]
[TIME ZONE]
[RING LED (BLUE)]
[ON]/[5 SEC.]/[OFF]
[RING LED (RED)]
[ON]/[OFF]
[QUICK POWER ON]
[ON]/[OFF]
[ALERT SOUND]
[OFF]/
(Volume low)/
(Volume high)
HC-PV100_GC_GW_SQW0750-1_mst.book 134 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
