- 119 -
Deleting part of a scene (AVCHD/Backup for Twin
Camera)
series/
series/
series
Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be
deleted.
The deleted scenes cannot be restored.
≥
Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene or a scene recorded as Backup
for Twin Camera. (
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥
Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene. (
)
1
Select the menu.
2
Touch the scene with a part to delete.
3
Set the section to delete by touching and sliding
the top and bottom section selection buttons
.
≥
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (
)
4
Touch [ENTER].
5
Confirm (play back) the scene after editing by touching [YES].
≥
A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥
A confirmation message appears.
7
Touch [ENTER].
≥
Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
≥
Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥
It may not be possible to delete part of a scene with a short recording time.
≥
The scene will be divided into two scenes when the middle part of a scene is deleted.
≥
/
/
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining. (
: [EDIT SCENE]
#
[SECTION DELETE]
WX970
VX870
V770
V760
MENU
0h00m15s
0h00m15s
0h00m15s
WX970M VX870M
V770M
V770M