CHARGE THE ONSIGHT CUBE
Connect the power adapter to the Power Port and
allow the battery to fully charge. When the Cube is
powered off, charging will take approximately 4 hours.
The battery will charge at a slower rate if the Cube is
powered on.
TURN POWER ON
Press the Power Button for one second
to turn ON the Cube.
TURN POWER OFF
Press the Power Button for one second to turn
OFF the Cube. When running on battery, the Cube
automatically powers off after 5 minutes of inactivity.
FRONT VIEW
TOP VIEW
BACK VIEW
CUBE
• Onsight Cube
• External Power Adapter
• Magnetic USB charging cable
• Wearable Mount, Straps and Clips
• Headband (for Rugged only)
• Monopod and Phone Attachment
QUICK START GUIDE
1
Camera
2
Laser
3
Buttons
4
Thermal Imager
5
Illumination
6
Microphone
7
Stream
LED
8
Power Button
1
CHARGING
Indicator
2
CONNECTION
Indicator
3
CAMERA MODE
Indicator
4
Mount Connector
5
Power/USB Port
6
Speaker
2
1
3
8
7
5
6
6
4
1
2
3
5
4
1
CHARGING INDICATOR:
On Battery Power:
Green
>40%
Orange
<40%
Red
<20%
Flashing Red <10%
While Battery is Charging:
Orange
<100%
Green
100%
2
CONNECTION STATUS INDICATOR:
Blue
Flashing: Waiting to pair to a host
device over bluetooth
Blue
Solid: Wireless is connected but
not paired to host device
Green
Solid: Connected to host device with
a wireless connection
White
Flashing: Firmware update in progress
3
CAMERA MODE INDICATOR:
Green
Video
Red
Thermal
Orange
Fusion
PAIRED
HOLD
both to unpair
from Host
STANDALONE
PRESS
Start/Stop
local recording
HOLD
Toggle Video/
Thermal/Fusion
PAIRED
PRESS
Start/Stop recording
on host device
HOLD
Toggle Video/
Thermal/Fusion
STANDALONE
PRESS
Capture Local
Picture
PAIRED
PRESS
Capture Picture
on Host Device
HOLD
Capture and Share
Picture
STANDALONE
PRESS
Toggle laser
HOLD
Toggle illumination
PAIRED
PRESS
Toggle laser
HOLD
Toggle illumination
TAP ANY BUTTON TO ACCEPT A CALL
