Panasonic GT02 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 67

Panasonic GT02 Скачать руководство пользователя страница 16

2.2 Connecting to External Devices

The GT is connected to an external device with a RS232C or RS422(RS485) interface.
The RS485 communication can be used in the command response mode only.

1:1 connection

1:1 connection is to connect one external device with one GT. The connection is cross connection that
each other’s sent data signals and received data signals are exchanged.

1:n connection

1:n connection is to connect one external device and more than two GTs. The connection is multi-
dropped connection using devices such as C-NET adapter.

Note:

For 1:n communication, the usable communication mode is the command response mode only.

Note) A RS485 - RS232C converter that enables the connection with a maximum of 63 units is
necessary to use up to 63 GTs. A maximum of 32 units are connected with the C-NET adapter.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

«
...
14
15
16
17
18
...
»

Содержание GT02




































































Отзывы:

Нет отзывов