Panasonic GT series, Руководство пользователя

Страница: 14 / 136

1-2
1.1 MELSEC-FX1S/ FX1N/ FX1NC Series
PLC model selection
Select “Mitsubishi MELSEC-FX Series".
Usable devices
Bit/Word Device No. Memo
Bit
Device
Input Relay X0000-X0337
Output Relay Y0000-Y0337
Internal Relay M0000-M1535
State S0000-S0999
Timer(contact) TS0000-TS0255
Counter(contact) CS0000-CS0255
Word
Device
Input Relay X0000-X0320 Specify address expression every 20
Output Relay Y0000-Y0320 Specify address expression every 20
Internal Relay M0000-M1520 Specify address expression every 16 multiples
State S0000-S0976 Specify address expression every 16 multiples
Timer(current) TN0000-TN0255
16 Bits Counter(current) CN0000-CN0199
32 Bits Counter(current) CN0200-CN0255
Data Register D0000-D0999
Note1) The addresses you can use may differ depending on the model. For details, please see the
manual for the PLC you are using.
Note2) If using an input relay, output relay and auxiliary relay in word units, please set the address in 16
point increments from 000. (X000, X020, X040 …, M000, M016, M032).
Communication Parameters Settings
The example of communication settings of GT and PLC is shown below.
Setting Values for GT (Set in the configuration setting of GTWIN.)
Item Setting
Baud Rate 9600bps
Data Length 7
Stop Bits 1
Parity Even
Setting the communication conditions for the PLC
“0” should be stored in D8120. (“0” is the default value, so this setting should not need to be entered by
the user.)