9
6. Camera/Color Bar Selector (CAM/BAR)
This selector is used to select either the video signal or
the SMPTE color bar signal (the EBU color bar signal
for PAL) which is output from the video output connec-
tor (VIDEO), YC (S-VIDEO) output connector or RGB/
YPbPr (D-SUB. 9-pin) output connector.
CAM:
The video signal from the camera is output.
BAR (For NTSC models):
The SMPTE color bar signal
is output.
BAR (For PAL models):
The EBU color bar signal is
output.
Set this switch to BAR when making video monitor
adjustments and recording the color bar signal.
7. White Balance Selector (ATW/AWC/MANU)
This selector is used to select one of the following white
balance modes.
ATW:
In this mode, the color temperature is monitored
continuously and thereby white balance is set auto-
matically.
AWC:
In this mode, accurate white balance is obtained.
The white balance settings are as follows:
1. Aim the camera at white chart.
2. Press the ITEM (AWC) button on the front panel
to set the white balance.
3. When the auto white balance is completed, the
auto warning indicator first blinks and then goes
off.
If the auto warning indicator remains lit, repeat the
above procedure for setting the auto white balance.
Notes:
• The auto white balance settings are not available
when displaying a freeze frame picture or an
enlarged picture using the
B
/E-ZOOM button.
• Before performing the auto white balance settings,
display normal pictures first by releasing the dis-
played freeze frame picture or the enlarged picture.
MANU:
The white balance can be adjusted manually
with the red gain (R GAIN) and blue gain (B GAIN)
controls.
Note:
When the "SCANNING MODE" setting is
changed, it is necessary to set or adjust the white
balance settings again.
8. Auto Warning Indicator
This indicator blinks while the white balance or black
balance is being automatically set. This indicator lights
continuously when the white balance or black balance
is set improperly. In this case, follow the auto white bal-
ance or black balance setting procedure.
9. Red and Blue Gain Controls (R/B GAIN)
These controls are used to manually adjust the white
balance.
These controls only work when the white balance selec-
tion switch (ATW/AWC/MANU) is set to MANU.
Turn the controls clockwise to increase the red and
blue signal levels, and counterclockwise to decrease.
10. Page Button (PAGE/FREEZE)
This button is used to display the SET UP menu by
pressing it for 2 seconds or more, and to change the
parameters in the SET UP menu.
When "ON" is selected for "FREEZE" on the SET UP
menu, pressing this button for less than 2 seconds
makes this button work as the FREEZE button in order
to display a freeze frame picture.
11. Item Button (ITEM/AWC)
While the SET UP menu is displayed, this button is used
to move the cursor to the downward.
Normally, when the white balance selection switch
(ATW/AWC/MANU) is set to AWC, this button is used to
set the automatic white balance control (AWC).
12. Left Button (
A
/ABC)
While the SET UP menu is displayed, this button is used
to move the cursor to the left.
Normally, this button is used to set the automatic black
balance control (ABC).
13. Right Button (
B
/E-ZOOM)
While the SET UP menu is displayed, this button is used
to move the cursor to the right in the SET UP menu.
When "ON" is selected for "ELECTRIC ZOOM" on the
SET UP menu, normally this button works as the ELEC-
TRIC ZOOM button in order to enlarge a picture up to
x2.5.
14. Scene File Selector (SCENE)
This selector is used to select the scene files.
15. Electronic Light Control ON/OFF Selector
(ELC ON/OFF)
This selector is used to select the electronic light con-
trol from followings.
ON:
Enables Electronic Light Control (ELC) mode and
disables Electronic Shutter Speed (SHUTTER)
mode.
OFF:
Enables Electronic Shutter Speed (SHUTTER)
mode and disables Electronic Light Control (ELC)
mode.
Note:
Confirm the setting of the ELC and SHUTTER
parameters on the SET UP menu.
16. Brightness Control (LEVEL)
This control is used to set the target value of brightness
in the following cases:
• When the position of the ELC ON/OFF switch is
"ON"
• When "AUTO" is selected for "GAIN" on the SET UP
menu
• When "AUTO" is selected for "SENS UP" on the SET
UP menu
Содержание GP-US522HB
Страница 29: ......