PART DESCRIPTION
6
MODE key
Jog switch
Digital display (Red)
MODE indicator /
PRO (Yellow)
MODE indicator / L/D ON (Yellow)
Output 1 operation indicator
(Orange)
MODE indicator / RUN (Green)
MODE indicator / ADJ (Yellow)
MODE indicator / TEACH (Yellow)
MODE indicator / TIMER (Yellow)
Output 2 operation
indicator (Orange)
OPERATION PROCEDURE
7
٨
When the power supply is switched on, communication self-check is car-
ried out and normal condition is displayed [MODE indicator / RUN
(green)] lights up and the digital display shows the incident light intensity.
TEACHING MODE
8
In case of 2-level teaching
ԙ
Press Jog switch in the object present condition. If the
teaching is accepted, the read incident light intensity blinks in
the digital display. (Note 1)
Ԛ
Press Jog switch in the object absent condition. (Note 1)
Press
Press
Press
Ԙ
Press MODE key to light up MODE indicator / TEACH (yellow).
Set to either Output 1 ' ' or Output 2 ' '.
Turn Jog switch: Select
Press Jog switch: Confirmed
ԛ
The threshold value is set at the mid-value between
ԙ
and
Ԛ
.
In case stable sensing is possible: '
䇭䇭䇭䇭
' is displayed.
In case stable sensing is not possible: '
䇭䇭䇭䇭
' is displayed.
Note: In case of using the fibers, if Jog switch is pressed in the object absent condition at
ԙ
and
Ԛ
,
the sensitivity is set to the maximum.
Press
Press
Ԙ
Press MODE key to light up MODE indicator / TEACH (yellow).
Set to either Output 1 ' ' or Output 2 ' '.
Turn Jog switch: Select
Press Jog switch: Confirmed
ԛ
In case stable sensing is possible: '
䇭 䇭 䇭 䇭
' is displayed.
In case stable sensing is not possible: '
䇭 䇭 䇭 䇭
' is displayed.
ԙ
Press Jog switch continuously for 0.5 sec. or more with the
object moving on the assembly line.
Ԛ
' ' is displayed on the digital display. Release the jog
switch when the object has passed.
In case of full-auto teaching
Press
Press
Ԙ
Press MODE key to light up MODE indicator / TEACH (yellow).
Set to Output 1 ' '.
Turn Jog switch: Select
Press Jog switch: Confirmed
ԛ
In case stable sensing is possible: '
䇭 䇭 䇭 䇭
' is displayed.
In case stable sensing is not possible: '
䇭 䇭 䇭 䇭
' is displayed.
٨
This is the method of setting the threshold range by 1-level teaching. The shift
value can be set as desired.
In case of window comparator mode / 1-level teaching
1_SL
P-1
2_SL
Set as
desired
Set as
desired
ԙ
The current teaching method is displayed for 0.5 sec.
Ԛ
Press Jog switch in the object present condition. If the
teaching is accepted, the read incident light intensity blinks in
the digital display.
Ԝ
A value deducted the shift value (100) from the incident light
intensity becomes the threshold value (1_SL), which is
displayed. (Note 1) (Note 2)
ԝ
A value added the shift value (100) to the incident light
intensity becomes the threshold value (2_SL), which is
displayed. (Note 1) (Note 2)
The shift value 100 digits is the initial value. The shift value can be changed in PRO mode.
Furthermore, 'digit' or 'percent' can be selected. For the setting method refer to '
PRO
MODE
PRO6 mode setting
'.
In case the set value exceeds the max. (min.) sensitivity, the set value is fixed at max.
(min.) sensitivity.
Notes: 1)
2)
13
In case of teaching in the window comparator mode, set the detailed settings in
PRO6 beforehand. For the settings, refer to '
PRO MODE
PRO6 mode setting
'.
13
In case of limit teaching
Press
Press
Ԙ
Press MODE key to light up MODE indicator / TEACH (yellow).
Set to either Output 1 ' ' or Output 2 ' '.
Turn Jog switch: Select
Press Jog switch: Confirmed
ԙ
Press Jog switch in the object absent condition. If the
teaching is accepted, the read incident light intensity blinks in
the digital display.
Ԛ
Turn Jog switch to the '+' side or the '-' side.
If Jog switch is turned to '+' side, the threshold value level is shifted
to a value approx. 15% higher (lower sensitivity) than that set at
Ԙ
.
If Jog switch is turned to '-' side, the threshold value level is shifted
to a value approx. 15% lower (higher sensitivity) than that set at
Ԙ
ԛ
In case stable sensing is possible: '
䇭 䇭 䇭 䇭
' is displayed.
In case stable sensing is not possible: '
䇭 䇭 䇭 䇭
' is displayed.
The approx. 15% amount of shift is the initial value. The amount of shift can be changed in the
PRO mode from approx. 0 to 80% (5% step). For the setting method refer to '
PRO MODE
PRO1 mode setting
'.
Note:
13
The 0-ADJ setting function in this product was removed from production starting May, 2005.
*1:
*2:
*3:
*4:
*5:
When Jog switch is pressed, the setting is confirmed.
When MODE key is pressed for 2 sec., or more, the sensor returns to the 'RUN' mode.
Cancellation is possible by pressing MODE key during setting.
When Jog switch is turned in the 'RUN' mode, the current threshold value is displayed.
And then, the current incident light intensity display appears again automatically.
If the jog switch and MODE key are pressed for more than 2 sec. at the same time in 'RUN'
mode condition, the key operations are locked, and only the threshold value confirmation
function or the adjust function (valid only when the adjust lock function is canceled) is valid.
To cancel the lock function, press both the keys for more than 2 sec. once again.
MODE key
Press
Press
Turn
'+' side
'-' side
Jog switch
٨
PRO mode
The items that can be set in output 1 and output 2 respectively are only the following.
The items other than those are common.
Ԙ
Threshold value
ԙ
Output operation
Ԛ
Timer operation and Timer priod
ԛ
Detection mode
٨
NAVI mode
This indicates normal sensing operation.
Run
RUN
Refer to '
TEACHING MODE
'.
8
Sets the threshold value by, '2-level teaching' or
'limit teaching', 'full-auto teaching', 'Max. sensitivity
teaching', 'Window comparator
1-level / 2-level /
3-level teaching'.
Teaching
TEACH
Refer to '
THRESHOLD VALUE FINE
ADJUSTMENT MODE
'.
9
Allows fine adjustment of the threshold value.
Adjust
ADJ
Refer to '
OUTPUT OPERATION
SETTING MODE
'.
11
Sets output operation either Light-ON, or Dark-ON.
L-ON/D-ON
L/D ON
Refer to '
TIMER OPERATION
SETTING MODE
'.
12
Configures operation of the timer.
Timer
TIMER
Refer to '
PRO MODE
'.
13
Allows various detailed settings to be configured, such
as optical communications, save/load and other settings.
Pro
PRO
Press
٨
To PRO mode
Press
Press
Press
Press
Press
Press
Refer to '
PRO
MODE PRO1
mode setting
'.
13
Turn
Response time change function '
'
Timer setting function '
'
Hysteresis function '
'
Shift function '
'
Emitting power selection function '
'
PRO1
Refer to '
PRO
MODE PRO2
mode setting
'.
13
PRO2
Turn
Refer to '
PRO
MODE PRO3
mode setting
'.
13
Refer to '
PRO
MODE PRO5
mode setting
'.
13
Refer to '
PRO
MODE PRO4
mode setting
'.
13
Setting condition copy
function '
'
Remote data bank load
setting function '
'
Remote data bank save
setting function '
'
Communication lock function '
'
Back-up function '
'
PRO4
Turn
Turn
Turn
Turn
PRO3
Data bank load setting function '
'
Data bank save setting function '
'
Refer to '
PRO
MODE PRO6
mode setting
'.
13
PRO5
Code setting function '
'
Adjust lock setting function '
'
Setting reset function '
'
Interference prevention function
'
'
PRO6
Output setting function '
', '
'
ECO mode setting function '
'
Digital display setting function '
'
Digital display inversion function '
'
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
