IMPORTANT:
13
Fig. 21
1. Disconnect plug connector from receptacle and remove
adaptor from fan body before starting installation. (Fig. 22)
2. Insert the suspension bracket into the adaptor. (refer to
step 2 of installation
of page 8).
II
Fig. 22
Fig. 23
Fig. 25
UP
3. Secure it to stud by using long screws (M4X30). (Fig. 23)
4. Insert the suspension bracket into fan body (refer to
step 2 of installation , page 6
I
).
6. Complete the duct work and wiring (refer to step 5 to 7
of the installation of page 7).
I
7. Finish the wall work, wall hole should be aligned with the
edge of the flange.
IMPORTANT:
Ensure distance C is 3/16 of an inch (5 mm) during the
installation process as follows.
8. Insert the mounting spring into slots and mount grill to fan
body (refer to step 9 of installation of page 8).
I
12 1/8 (305)
12
1/8
(305)
inches (mm)
5. Secure the fan body to the studs by using long screws
(M4X30) (
step 5 to step 7 of installation II of
page 9). (Fig. 24)
refer to
2 Long screws
(M4X30)
2 Long screws
(M4X30)
Adaptor
Wall
Stud
Stud
C 3/16 (5)
Fig. 24
2 Long screws
(M4X30)
2 Long screws
(M4X30)
When the product is installed on the wall, the adaptor shall be faced upward. (Fig. 21)
inches (mm)
Prohibition
Prohibition
Prohibition
