5. Complete the duct work and wiring (refer to steps 5 to 7
of the installation on page 7).
I
6. Follow step 7 to 8 of the installation
to complete
installation work.
VII
15
Fig. 29-2
2-Long screws
(M4X30)
4. Secure the suspension bracket to the wall stud using long
screws (M4X30). Secure the fan body and spacer
to stud using long screws (M4X30). (Fig. 29)
Fig. 29-3
Fan body
Stud
2 Long screws
(M4X30)
Suspension
bracket
I
Spacer
Disconnect power source before working on unit. Routine
maintenance must be done every year.
WARNING:
CAUTION:
1. Never use petrol, benzene, thinner or any other such
chemicals for cleaning the ventilating fan.
2. Do not allow water to enter motor.
3. Do not immerse resin parts in water over 60 C.
o
1. Remove grille. (Squeeze mounting spring and pull down
carefully.) (Fig. 30)
2. Wash and clean grille. (Use non-abrasive kitchen detergent,
wipe dry with new cloth.) (Fig. 31)
Glove
Grille
Slot
Mounting
spring
Fig. 30
Grille
Fig. 31
